QBefore first use
QCharging the battery pack
JBefore cleaning or servicing the charging station or the battery pack always ensure that the plug is not in the mains socket.
Note! A new battery pack, or one that has not been in use for an extended period, must be charged up before the first/ renewed usage.
The battery pack attains its full capacity after ca.
mCAUTION! Always ensure the plug is removed from the mains socket before inserting a battery pack into, or removing one from, the charging station.
JNever charge the battery pack if the ambient temperature is less than 10 °C or greater than 40 °C.
1.Insert the battery pack 8 into the quick- charger 11 (see Fig. C).
2.Insert the power plug into the socket. The now glowing red charging control LED 13 indicates that the charging process has begun. The red charging control LED 13 extinguishes as soon as the battery pack is fully charged.
3.The green charging control LED 12 signals to you that the charging process is complete and the battery pack 8 is ready for service.
JNever charge the battery pack for a second time immediately after a fast charging process has been completed. This can give rise to the battery pack becoming overcharged and to a reduced service life of the battery and charging station.
jSwitch the charger off for at least 15 minutes between two successive charging procedures. Remove the power plug from the wall socket.
Before first use
QInsertion / removal of a battery pack into the appliance
Ensure that the appliance is switched off before inserting the battery. The insertion of a battery into an electrical appliance that is switched on can lead to accidents.
Inserting the battery pack:
jBring the rotation direction switch 4 into the middle position (Locked) and insert the battery pack 8 into the handle until it engages.
Removing the battery pack:
jTo remove the battery pack from the charger - press the two battery release buttons 6 on the sides at the same time and remove the battery pack.
QChecking the battery condition
jTo do this, press the button (refer to Fig. D) on the battery display LED 3 . The charge remaining is correspondingly displayed.
QChanging tools
Your cordless electric drill / screwdriver has a fully
automatic spindle lock 
and is fitted with an enclosed keyless chuck incorporating the latest
technology from 
”Made in Germany”.
Once the motor has come to a halt, the drive shaft is automatically locked, so that the chuck 10 can be opened simply by turning it 
.
After you have inserted the required bit and fixed it in place by turning the chuck 
, you can immedi- ately continue working. The spindle lock releases itself automatically when the motor is started (by operation of the ON / OFF switch 5 ).
GB/IE/CY
11
