Answering and making calls
Answering calls
A ring tone is heard and the blue LEDs start flashing.
Press 
to answer.
The LEDs show a steady blue light.
Answering calls on hold
If a call is made to the conference phone during another call, you will hear a double tone, INCOMING CALL will be displayed on the screen and the blue LEDs start flashing.
Press 
to answer.
The original call will automatically be put on hold.
Press the 
(Conference) button to connect the calls.
Press 
to end the new call and HOLD to reconnect the original call. Use the line mode LINE (See page 13) to switch between the calls.
Making calls
See “MANAGING PHONE LINES” on page 12 about selecting an account before dial- ling.
Dial the number.
Press 
.
The number is called and the LEDs show a steady blue light. The duration of the call is shown on the display screen.
Or:
Press 
.
Dial the number and press OK to confirm.
The number is called and the LEDs show a steady blue light. The duration of the call is shown on the display screen.
Redialling
Press an arrow button.
The last number that you dialled appears on the display screen.
Use the arrow buttons to scroll through the call list.
Press 
.
The number you have selected is dialled.
You can delete the call list by scrolling to the end of the list and pressing OK when the question “CLEAR LIST?” appears.
Answering and making calls
Calling from the phonebook
Please turn to page 17 for instructions on adding and updating contacts in the phone- book.
Press and hold down a number button for two seconds.
The phonebook appears on the display screen. The
Use the arrow buttons to mark the name in the phonebook.
Press 
.
The number you have selected is dialled.
8 | 9 |
