bizhub 164 3-3
3.1 Turning on or off the machine 3
3 Using this machine

3.1 Turning on or off the machine

0The default settings are the settings that are selected immediately after the Power Switch is turn ed on
and before any settings are configured from the Control Panel, and those that are selected when the
Back/Stop/Reset key is pressed to cancel all settings configured from the Control Panel. The default
settings can be changed.
0If no operation is performed for a specified length of time, the machine automatically returns to the de-
fault settings.
0If no operation is performed for a specified length of time, the machine automatically enters a mode
where it conserves energy. This is referred to as the Sleep mode. When the machine is in the Sleep
mode, the indicator on the Start key remains lit in green, but the Display goes off. The machine returns
from the Sleep mode when any key on the Control Panel is pressed.
0[Warming Up] appears on the Display when the Power Switch is turned on or the machine returns from
the Sleep mode. Loading an original and pressing the Start key with the Start key lit up green allows
you to reserve a copy job. After the machine has finished warming up, the original will be scanned.
0Do not turn off the Power Switch while a queued job or stored data is waiting to be printed. The jobs
yet to be printed will be deleted.
0Settings that have not been registered and jobs in the printing queue are cleared when the Power
Switch is turned off.
0To turn the Power Switch on immediately after turning it off, wait for 10 or more seconds before turning
it on again. Not doing so may result in an operation failure.
0Do not turn off the Power Switch while images are being scanned, transmitted, or received. Data being
scanned or communicated will be deleted.
0Do not turn off the Power Switch during the copying or printing process. If you turn it off, a paper jam
may occur.
1To turn the power on, press n on the Power Switch.
Check that the Display is turned on.
2To turn the power off, press o on the Power Switch.
dReference

To change the default settings for copy:

Press the Menu/Select key ö [UTILITY] ö [COPY SETTINGS].

To change the length of time before switching to the Sleep mode:

Press the Menu/Select key ö [UTILITY] ö [MACHINE SETTING] ö [SLEEP MODE].

To change the length of time until the Auto Panel Reset function is operated:

Press the Menu/Select key ö [UTILITY] ö [MACHINE SETTING] ö [AUTO PANEL RESET].