bizhub 164 3-7
3.2 Basic operations 3
3Align the original with the mark in the back-left corner of the Original Scale.
%For transparent or translucent originals, place a blank sheet of paper of the same size as the original
over the original.
%For the ID Copy, position the original 4mm (3/16 inches) away from the Original Scale.
%For double-page spread originals such as a book or a magazine, position the top of the original to-
ward the back of this machine and align the center of original with the mark on the Original
Scale.
4Close the Original Cover.
3.2.3 Basic copy operations
1Place the original face down on the Original Glass.
2From the Control Panel, specify the necessary copy settings.
%For details on copy functions, refer to page5-5.
%Combine frequently used copy settings into programs and register them with this machine. These
programs can easily be recalled as programs. For details on programs, refer to page5-15.
3Specify the number of copies you desire.
Press the + or , key to increase or decrease the number of copies by one at a time.
%To clear the specified number of copies, press the Back/Stop/Reset key รถ [QUANTITY].
4Press the Start key.
The original is scanned and copied.
%To interrupt the copy operation being performed, press the Back/Stop/Reset key.
%If the following screen appears, place the new original on the Original Glass, then press the
Menu/Select key to scan it.
To start printing, press the Start key.