Konica Minolta 164

bizhub 164 6-5

6.2 Installing using Plug and Play 6

6.2.2 Installing the driver in Windows XP/Server 2003

1Connect this machine to the computer using a USB cable, then start the computer.

NOTICE

When starting up the computer, do not plug in or unplug the cable.

2Insert the driver CD-ROM into the CD-ROM drive of the computer.

3Turn on the power of this machine.

The [Found New Hardware Wizard] dialog box appears.

%If the [Found New Hardware Wizard] dialog box does not appear, turn this machine off, then on

again. In this case, turn off this machine, then wait approximately 10 seconds before turning it on

again. If you turn this machine on immediately after turning it off, it may not function correctly.

%If a dialog box with a message saying [Windows Update] appears, select [No].

4Select [Install from a list or specific location (Advanced)], then click [Next >].

5Under [Search for the best driver in these locations.], select [Include this location in the search:], then

click [Browse].

6Specify the desired driver folder and click [Open].

%Select a folder according to the driver, operating system, and language to be used.

e.g.: \Win32\English

7Click [Next >], then follow the instructions on the pages that follow.

%If the [Windows Logo testing] or [Digital Signature] dialog box appears, click [Continue Anyway] or

[Yes].

8Click [Finish].

This completes the scanner driver installation. The [Found New Hardware Wizard] dialog box appears

again, and the installation of the printer driver begins.

9Repeat steps 4 through 8 to install the printer driver.

10 After finishing the installation, make sure that the icon for the installed printer is displayed in the [Printers

and Faxes] window.

11 Remove the CD-ROM from the CD-ROM drive.

This completes the installation of the scanner driver and printer driver.

6.2.3 Installing the driver in Windows 2000