bizhub 164 10-5
10.1 Paper 10
Loading paper into the Bypass Tray
0The Bypass Tray is an option.
0Make sure that the original and the loaded paper have the same orientation. Otherwise, some parts of
the image may be lost.
1Slide the Lateral Guides to provide more space between them.
%1. Paper Take-Up Roller
NOTICE
Be careful not to touch the Paper Take-Up Roller.
2With the side to be printed on (the side facing up when the package was unwrapped) facing down, in-
sert the paper as far as possible into the feed slot.
%The image will be printed on the surface of the paper facing down.
%Do not load so many sheets of paper that the top of the stack is higher than the , mark.
%If paper is curled, flatten it before loading it.
%Allows you to load up to 100 sheets of plain paper, or 20 sheets of card in the paper tray.
3Slide the Lateral Guides to fit the size of paper being loaded.
%Push the Lateral Guides firmly up against the edges of the pa-
per.
4Press the Start key to restart printing.
1