FLASH SIGNALS

The viewfinder flash signal indicate the status of the flash.

Signal steady - flash charged and ready to fire.

Signal blinking - flash output was sufficient for exposure.

If the flash signal does not blink after taking the picture, the subject was not within the flash range.

FLASH RANGE

The range of the built-in flash depends on the speed of the film and the aperture used for the exposure. The subject must be within the flash range specified in the table below to be correctly exposed.

Aperture

ISO 100

ISO400

f/2.8

1.0 ~ 5.6m / 3.3 ~ 18.4 ft.

1.0 ~ 11m / 3.3 ~ 36 ft.

f/3.5

1.0 ~ 4.5m / 3.3 ~ 14.8 ft.

1.0 ~ 9.0m / 3.3 ~ 29.6 ft.

f/4.0

1.0 ~ 4.0m / 3.3 ~ 13.1 ft.

1.0 ~ 8.0m / 3.3 ~ 26.2 ft.

f/5.6

1.0 ~ 2.8m / 3.3 ~ 9.2 ft.

1.0 ~ 5.6m / 3.3 ~ 18.4 ft.

Camera Notes

With full-auto program, program, and subject programs, fill flash can be used with specific single exposures. Press and hold the flash-mode button while pressing the shutter- release button to make the exposure; the flash pops up automatically.

25