MULTIPLE EXPOSURES

The multiple-exposure function makes it possible to expose two or more images on the same frame. The built-in flash can be used, but overexposure could result.

1

3

2

Turn the function dial to the multiple-exposure position (1).

While pressing the function button (2), turn the control dial

(3)until “ME” is displayed in the frame counter. Release the function button. The first exposure can be taken.

ME will blink on the data panel after the initial exposure to indicate the next exposure will be the final one. Press the shutter- release button to take the second exposure and advance the film. Multiple-exposure mode is canceled after the last exposure.

To make more than two exposures, press the function button and turn the control dial to stop “ME” blinking after the initial exposure. An unlimited number of exposures can be made by repeating this procedure.

The camera meter indicates the required exposure for a single picture. Depending on the scene, the exposure may have to be compensated.

53