Press the flash mode button to raise the flash.

Position the camera and flash around the subject. See the following page for the camera-to-subject and flash- to-subject ranges. Make sure no objects come between the camera and flash unit.

The flash units can be test fired by pressing the AEL button on the camera; custom function 9 must be set to 1 (p. 64). If the flash does not fire, change the camera, flash, or subject position.

When the 5600HS(D) and 3600HS(D) flash is charged, the AF illuminator on the front of the unit blinks. Take a picture as described in the basic operation section on page 21.

To cancel wireless/remote flash, mount the flash on the camera and turn the function off using the function button and control dial. For more about flash operation, refer to the manual supplied with the flash unit.

61