CUSTOM 1 - AF/SHUTTER PRIORITY

Custom function 1 has two settings:

1AF priority. Shutter will not release until the camera focuses.

2Shutter-release priority. Shutter releases even if the focus cannot be confirmed. Use shutter-release priority when photographing moving subjects. When using the continuous- advance drive mode, the camera does not focus between exposures.

CUSTOM 2 - FILM REWIND

Custom function 2 has two settings:

1Automatic. The film is automatically rewound at the end of the roll.

2Manual. The manual-rewind button must be pressed at the end of the roll to initiate rewind (p. 29).

CUSTOM 3 - FILM LEADER

Custom function 3 has two settings:

1Wind in. The film is completely rewound into the cartridge.

2Leave out. The film leader is exposed after

rewind. Turning the camera off during rewinding allows the film leader to be rewound into the cartridge by turning the camera on after the film transport motor has stopped.

66 ADVANCEDOPERATION