DRIVE MODES

1

3

2

The drive modes control how pictures are captured. Four drive modes are available.

Turn the function dial to the drive- mode position (1).

While pressing the function button (2), turn the control dial (3) until the appropriate drive mode is displayed on the data panel. Release the function button to complete the operation.

Single-frame advance - to take a single image each time the shutter-release button is pressed (p. 21).

Continuous advance - to take a series of images when the shutter-release button is pressed and held (p. 51).

Self-timer- to delay the release of the shutter by approximately ten seconds. Used for self portraits (p. 51).

Remote control - to release the shutter from up to 5m (16.4ft.) away with the optional Remote Control RC-3 (p. 52).

50 ADVANCEDOPERATION