Flash picture is too

Subject is beyond

Make

sure the

subject is within the

dark.

flash range.

flash range.

 

 

 

 

Remove the lens

When using the

Lens hood was

hood. To prevent

built-in flash, the

attached or subject

lens shadowing, the

bottom of the

distance was less

subject must be at

picture is dark.

than 1m (3.3ft).

least 1m (3.3ft.)

 

 

from the camera.

 

Remove the batteries. Reinsert them after

Err appears on the

turning the camera

off and

on. If normal

camera operation does not resume or the

 

data panel.

camera malfunctions repeatedly, contact an authorized Konica Minolta service facility.

CAUTION: if the film was not rewound, opening the back cover with this method will fog the film; use a film changing bag, completely dark room, or place the camera under a thick blanket.

To remove the film from the camera in case of a malfunction, use the following procedure:

1.Turn the camera off.

2.Turn the function dial to the ISO position.

3.While pressing the function button and AEL button, turn the camera on. The film transport motor will activate for a second to release the film-chamber lock. The back cover can be opened. When the camera is open, gently pull the film off the take-up spool and rewind it back into the cartridge.

Contact an authorized Konica Minolta service facility.

79