Scanning With the Machine6-10

Specifying the Data Location

Select whether the computer or USB memory device is the location where
scan data is to be saved. When transmitting via a network, refer to “Specify-
ing the Destination Address (Scan to E-mail/FTP/SMB)” on page6-12.
" If an address has been specified as the destination for the data, SCAN
TO PC and SCAN TO USB MEMORY cannot be selected.
Saving Data on a Computer Connected (Scan to PC)
In order to perform Scan to PC operations, the following requirements must
be met.
zThis machine is connected to a computer using a USB cable.
zThe TWAIN scanner driver, the printer driver and LinkMagic (Windows
only) are installed on the computer.
zEither LinkMagic is activated or the LinkMagic icon appears in the
Windows notification area.
zThe document is positioned at the location specified with Paper
Source (Flatbed (original glass) or ADF) in LinkMagic.
" For details on LinkMagic, refer to the Reference Guide on the Docu-
mentation CD/DVD.
Follow the procedure described below to send scan data to a computer con-
nected to this machine.
" The scan settings specified with LinkMagic are given priority. Specify
the various settings with LinkMagic. For details, refer to the Reference
Guide on the Documentation CD/DVD.
1In the main screen (Scan mode), press the + or , key to select SCAN
TO, and then press the Select key.
2Press the + or , key to select SCAN TO PC, and then press the Select
key.
" The scan data is saved in the folder specified with LinkMagic. For
details, refer to the Reference Guide on the Documentation CD/DVD.