Cleaning the Machine 8-11
Cleaning the Media Feed Rollers for Tray 2
Be sure to remove the duplex option before cleaning the media feed rollers
for Tray 2.
1If the duplex option is installed, remove it.
" If the duplex option is not installed and the locking pins are
installed at the back of Tray 2, remove the locking pins (one in
each opening on the left and right sides at the back of Tray 2).
To remove a locking pin, turn it to either the left or the right so that
its grip is vertical, and then pull out the locking pin to remove it.
2Remove the dust cover from Tray 1 and close the tray.
3Lift the machine off of Tray 2 and
temporarily place it on a sturdy
flat surface.
4Clean the media feed rollers by
wiping them with a soft, dry
cloth.