Konica Minolta A0HF012 6, 7 8, 9, 2, 3, 4, 5, 6, 7, 8

Scanning With the Machine 6-25
" For details on entering/editing text, refer to “Entering Text” on
pageA-6.
6Use the keypad to type in the number (between 1 and 220) for the speed
dial destination to be added to the group, and then press the Select key.
The information registered for the selected speed dial destination
appears.
7Press the Select key again.
8To register another speed dial destination, press the + or , key to select
ADD, press the Select key, and then repeat the procedure from step 6.
9To finish registering speed dial destinations, press the + or , key to
select FINISH, and then press the Select key.
Editing/Deleting Group Dial Destinations
Information registered with a group dial destination can be edited or deleted.
1In the main screen (Scan mode), press the + or , key to select UTIL-
ITY
, and then press the Select key.
2Press the + or , key to select DIAL REGISTER, and then press the
Select key.
3Press the + or , key to select GROUP DIAL, and then press the Select
key.
4Use the keypad to type in the number (between 1 and 20) for the group
dial destination to be edited/deleted, and then press the Select key.
The information currently registered for the group dial destination appears
for about two seconds.
5Press the + or , key to select EDIT to edit information or DELETE to
delete the destination, and then press the Select key.
If DELETE was selected, the settings are deleted, and the DIAL REG-
ISTER menu appears again.
6If desired, edit the group name, and then press the Select key.
" For details on entering/editing text, refer to “Entering Text” on
pageA-6.
7Press the + or , key to select ADD to add a speed dial destination,
CHECK/EDIT to delete the destination or FINISH to finish editing, and
then press the Select key.
If FINISH was selected, the edited settings are saved, and the DIAL
REGISTER menu appears again. If ADD was selected, continue with step
6 of “Registering Group Dial Destinations” on page 6-24. If CHECK/EDIT
was selected, continue with step 8.
8Press the + or , key to select the speed dial destination to be deleted,
and then press the Stop/Reset key.