MANUAL FOCUS

When autofocus is not suitable and focus hold is not possible, focus the lens manually. The autofocus system will monitor focus and indicate when the subject in the focus frame [ ] is in focus.

1. Press the focus-mode

button, will appear in the data panel

and will appear in the viewfinder.2. Turn the focusing ring until your subject appears sharp and focused.

• The focus confirmation signal ( ) will appear in the viewfinder when the subject in the focus frame is in focus.

•Manual focus is not available on lenses without a focusing ring.

•Press the focus-mode button again to return to autofocus mode.

USING THE

BUILT-IN

FLASH

40

41