FULL-AUTO OPERATION

Full Auto is the camera’s standard operating mode and is suited for use in almost any situation. When the program- reset button is pressed, the camera is returned to fully- automatic operation. See page 96.

1. Press the main switch to turn the camera on.

2. Press the program-reset button to set the camera to Full Auto.

3.Set the format-selector switch to the desired print format (C, H, or P).

4.Center your subject in the focus frame [ ] and press the shutter-release button partway down to activate

autofocus. or will glow when the subject is in focus.

• The built-in flash will pop-up and fire when necessary.

5. If you are using a zoom lens, rotate the zooming ring on the lens to frame the subject as desired.

6.Press the shutter-release button all-the-way down

to take the picture.

•In low-light conditions, the AF illuminator (flash) will fire to determine focus distance.

•To take a picture with your subject outside the focus frame [ ] use focus hold. See page 38.

30

31