ADDITIONAL

FEATURES

PRINT-QUANTITY SELECT

Print-quantity select lets you choose the number of prints you will receive from the lab before taking the picture.

Setting the Print Quantity
Before taking the picture-

1. Open the control-panel door and press the print button to enter the desired number of prints.

• The quantity will be displayed on the data panel.

• Press the print button to increase the quantity by one.

• The quantity can be set to a maximum of nine. After 9, the quantity restarts at 1.

• Press the shutter-release button partway down to return to the normal data panel

display; will remain in the data panel.

2. Take the picture.

• The quantity is reset to one for the next frame.

•After taking the picture, the print quantity can only be changed to 0.

•The default quantity for color slide film is 0.

•Some labs may not be able to read the print quantity data. See your photofinisher for details.

64

65