PRINT-QUANTITY SELECT
Setting the Print Quantity to Zero
If someone walked into the picture at the last moment, or you don't need prints, you can set the print quantity to zero after taking the picture.
•Zero the print quantity before taking the next picture.
•Automatic rewind prevents the last frame from being zeroed.
After taking the picture-
1. Open the
2. Press the select button.
• The camera will wind the film back to rewrite the data, then readvance the film to the next frame.
•Once selected, this quantity is not changeable until reprints are ordered.
•The exposed frame itself remains on the film and can be printed when ordering reprints.
•Some labs may not be able to read the print quantity data. See your photofinisher for details.
DATE/TIME IMPRINTING
Your camera records date, time, and title information on the film’s magnetic data strip. The recorded information is read at the photo lab and imprinted on the back of your photographs.
•Some labs can not print date and/or time information on the front of your photographs. See your photofinisher for a full description of available services.
•This camera always records date and time information on the film’s magnetic data strip.
•See your photofinisher for details on having date and time information imprinted onto prints made from the slides.
Setting the Date/Time
1. Open the control-panel door, then press the date button.
2. Press the select button until the item you want to adjust blinks.
• Each press of the select button causes the next item to blink.
• The sequence is as follows: year
66 | 67 |