TITLE IMPRINTING

3. Press the select button, the first digit of the title code will blink.

• Pressing the select button causes the next item to blink, starting at the right and moving to the left.

4. Rotate the control dial to change the value of the blinking number.

5. Press the select button to make the next digit blink. Rotate the control dial to change its value.

6. Press the select button to make the language code blink, then rotate the control dial to change the language code.

7. When the title information is correct, press the title button, or press the select button until the display stops blinking.

• Press the shutter-release

 

 

 

 

 

 

 

 

button partway down to return

 

 

 

 

 

 

 

 

to the standard data-panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

display. After setting the title information,

 

will remain in

 

 

the data panel.

 

 

•Follow the sequence as stated above. If the wrong button is pressed, the new data will not be entered.

Frame Title Imprinting

Before taking the picture- 1. Open the control-panel

door.

2. Press the title button to select the desired title.

• Each press of the title button changes the title to the next selection.

• The title number (1, 2, or 3) is displayed in the lower right hand corner of the data panel.

•Press the shutter-release button partway down to return to the standard data-panel display. After setting the title information, will remain in the data panel.

3.Take the picture. The IX Data is written and the selection is canceled for the next frame.

72

73