BULB

Bulb can only be used in M mode. When set, the shutter will remain open as long as you press the shutter-release button. To avoid blurry pictures, mount the camera on a tripod and use the optional IR Remote Control RC-3 to release the shutter.

1. Select M mode.2.Turn the control dial until bulb appears in the data panel.

3.Press and hold the exposure-compensation/ aperture button, then turn the control dial to set the aperture.

4.Mount the camera on tripod and compose the picture.
5. Remove the eyepiece cup.

Eyepiece Cup

6.Slide the eyepiece cap on.

•The eyepiece cap prevents stray light from entering the

eyepiece and affecting exposure.

Eyepiece Cap

7.Press and hold the shutter-release button to take the picture.

•The shutter will remain open until the shutter-release button is released.

•The shutter speed data on the back of the print will be recorded as 100 seconds.

When using the IR Remote Control RC-3

1.Press the • button to open the shutter immediately, or press the 2s button to delay the release for two seconds.

2.Press either button to close the shutter.

80

81