CONTINUOUS-DRIVE MODE

In this mode, the camera will release the shutter and advance film as long as the shutter-release button is held down.

1. Press the drive-mode

button until appears in the data panel.

2. Press the shutter-release button down and hold.

• The camera will continue to release the shutter and advance the film as long as the shutter-release button is held down.

•When taking flash pictures, the shutter will release after the flash is charged.

•When the subject is moving, the shutter will release after the camera focuses on the subject.

•The frame title and print quantity do not change during a continuous drive series of pictures.

•To cancel continuous-drive mode, press the drive-mode button until the drive-mode indicator disappears from the data panel, or turn the camera off.

REMOTE-CONTROL (optional)

The IR Remote Control RC-3 is an optional accessory you can purchase to operate your camera from up to 6m (19.7 ft.) away.

•The remote control may not operate with backlit subjects or under fluorescent light.

•To save power, remote-control mode is canceled if the remote control is not operated for more than eight minutes.

•If there is a bright light source behind the camera, attach the eyepiece cap. See page 81.

•The IR Remote Control RC-3 is not splashproof.

1. Place the camera on a tripod, then press the remote-control button until appears in the data panel.

 

 

2. Arrange the camera and

 

°

subject positions, then

25

15 °

15

compose your picture.

 

25

Emitter window

2s

2s delay button

• Release button

IR REMOTE CONTROL

RC-3

3.Point the remote emitter toward the front of the camera and press the • or 2s button.

76

77