3Transmission
3-48 C450
4Designate the time to start communication from the keypad.
– “Hour” and “minute” of the time to start communication are dis-
played in the 24-hour style, and entered in two digits.
– For example: To set the time to start communication at 9:07 p.m.,
input “21” and “07.”
5Press [OK].
You return to the comm. setting screen.
6Press [OK].
– To release the setting, press [OFF] or [Cancel].
You return to the fax screen.
7Set other functions if necessary.
– See “Setting transmission conditions ” on page 3-11 for i nformation
about setting functions in the fax screen. See “Opening the scan
setting screen and comm. setting screen” on page 7-3 for informa-
tion about setting functions in the fax application scre en.
8Designate the destination(s).
– For details, refer to “Selecting one destination” on page3-21.
9Set the original document.
– For details, refer to “Placing originals on the platen glass” on
page3-8.
10 Press [Start].
The FK-502 reads the document and holds it in memory until the spec-
ified time when transmission starts.