Transmission 3
C450 3-9
3.2.3 Sending multiple originals from the platen glass
Originals that cannot be sent with the ADF can be sent by using the platen
glass.
Sending multiple originals from the platen glass
1If the fax screen is not displayed, press [Fax] on the control panel to
open the fax screen.
2Select a destination.
3Set the desired functions as necessary.
4Place the original on the platen glass.
Press [Scan Setting] - [Separate Scan]
- [OK] and then press [Start].
5Place the next original on the platen
glass and press [Start].
Repeat this procedure until all orig-
inals to be sent have been scanned.
The scanned originals are stored in
memory.
6Press [Finish].
The document reading mode is canceled.
7Press [Start].
Transmission begins.