Transmission applications 7
C450 7-9
4Press [OK].
– To release the setting, press [Cancel].
The scan setting screen will be restored.
5Press [OK].
The fax screen will be restored.
6Set other functions if necessary.
– See “Setting transmission conditio ns” on page 3-11 f or information
about setting functions in the fax screen. See “Application func-
tions overview” on page7-5 for information about setting functions
in the scan setting or comm. setting screen.
7Designate the destination.
– See “Selecting one destination” on page 3-21 for designating the
destination.
8Set the original document.
– See “Placing originals on the platen glass” on page 3-8 for informa-
tion about setting the document.
9Press [Start].
The FK-502 stores the document in memory before starting transmis-
sion.
!
Detail
To cancel transmission, see “Canceling transmission” on page3-35.
If the destination is not ready to receive, your call will be redialed. For in-
formation about redialing, see “Manual redialing” on page3-30.
If transmission fails, refer to “Cannot send messages” on pag e 5-3.