Konica Minolta DiMAGE G600 instruction manual Pictbridge

PICTBRIDGE

Confirm the transfer-mode option in the setup menu is set to PictBridge. Connect the camera to a PictBridge compatible printer using the camera’s USB cable. The larger plug of the cable is connected to the printer. Insert the smaller plug of the cable into the camera; the camera turns on automatically and starts the PictBridge connection.

Individual still images can be selected for printing on the PictBridge screen. When two memory cards are in the camera, only the images on the card specified with the memory priority option on the setup menu (p. 75) can be viewed.

Total number of prints

Number of copies

Image size

Total: 3 2

1600

:move :sel. :print

Use the left/right keys of the controller to display the image to be printed.

Press the up key to select the number of copies to be printed. No more than 50 images can be selected. To deselect an image for printing, press the down key until the number of copies reaches zero.

Repeat the previous steps until all the images to be printed are selected. Press the menu button to continue.

92DATA-TRANSFER MODE