CONNECTING TO WINDOWS 98 AND 98 SE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be installed manually with the operating system’s add-new-hardware wizard; see the instructions on the following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver software is required for other Windows or Macintosh operating systems.
Automatic Installation
Before connecting the camera to the computer, place the DiMAGE Viewer CD-ROM in the CD-ROM drive. The DiMAGE installer menu should automatically activate. To automatically install the Windows 98 USB driver, click on the starting-up-the-USB-device- driver-installer button. A window appears to confirm that the driver should be installed; click “Yes” to continue.
When the driver has
been successfully installed, a window appears. Click “OK.” Restart the computer and connect the camera (p. 84) to complete the operation.
85 
