Installing batteries

This digital camera uses two AA-size Ni-MH batteries or one CR-V3 lithium battery. When using Ni- MH batteries, fully recharge them with a battery charger suitable for complex electronic equipment. Although alkaline batteries can be used, their performance is very low and is not recommended for normal use. Do not use other types of AA batteries.

When replacing the batteries, the camera should be turned off.Open the battery-chamber door on the bottom of the camera by

2 sliding the door toward the side of the camera (1) to release the safety catch; the door can then be opened (2).

1

AA-size batteriesInsert the batteries as shown. Never force the battery.

3

4

CR-V3 lithium battery

Close the battery-chamber door (3) and slide it toward the body (4) to engage the safety catch.

11