Connecting the camera to a computer

Confirm the battery has sufficient power before connecting the camera to a computer, the full-battery indicator should be displayed on the monitor. The auto power off function is disabled when the camera is connected to a computer. The use of the AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98 or 98SE, read the section on how to install the required USB driver before connecting the camera to a computer (p. 49).

PC MODE

1.The memory-type option in the setup mode must be set to the storage location of the images (p. 38 and 45). Turn the mode dial to the data transfer position.

1

2.Start up the computer. The computer must be on before connecting the camera.

3.Open the terminal cover. Attach the

3 smaller plug of the USB cable to the camera. Make sure the plug is firmly attached.

4.Attach the other end of the USB cable to the computer’s USB port. Make sure the plug is firmly attached.

•The camera should be connected directly to the computer’s USB port.

 

Attaching the camera to a USB hub

 

may prevent the camera from

 

operating properly.

•

When the camera is connected to a

4

computer, the LCD monitor is off.

47