Konica Minolta E223 DATA-TRANSFERMODE, System requirements, Macintosh, Mac OS 9.0 ~ 9.2.2, Windows 98, 98SE, Me, 46DATA TRANSFER MODE, IBM PC / AT Compatible

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. Instructions on using and installing the DiMAGE Viewer software are found in the supplied software manual. The DiMAGE manuals do not cover the basic operation of computers or their operating systems; please refer to the manual supplied with your computer.

System requirements

For the camera to be connected directly to the computer and used as a mass-storage device, the computer must be equipped with a USB port as a standard interface. Both the computer and the operating system must be guaranteed by their manufacturers to support USB interface. The following operating systems are compatible with the camera:

IBM PC / AT Compatible	Macintosh
Windows 98, 98SE, Me,	Mac OS 9.0 ~ 9.2.2,
	Mac OS X v10.1.3 ~ 10.1.5, and v10.2.1 ~
2000 Professional, and XP.
	10.2.3

Check the Minolta web site for the latest compatibility information:North America: http://www.minoltausa.comEurope: http://www.minoltasupport.com

Users with Windows 98 or 98 second edition will need to install the driver software on the included DiMAGE Viewer CD-ROM (p. 49). No special driver software is required for other Windows or Macintosh operating systems.

Customers who have bought a previous DiMAGE digital camera and have installed the Windows 98 driver software must repeat the installation procedure. The updated version of the driver software included on the supplied DiMAGE Viewer CD-ROM is required for the operation of the DiMAGE E223 with a computer. The new software will have no affect on the performance of older DiMAGE cameras.

46DATA TRANSFER MODE