Konica Minolta F300 Cause, Problem, Symptom, Solution

Problem Symptom Cause Solution

Pictures are not sharp.

Focus signal is red.

Subject is too close.

The camera is in macro mode.

A special situation is preventing the autofocus system from focusing (p. 27).

Make sure the subject is within the autofocus range (p. 24) or use the macro mode (p. 29).

Cancel the macro mode setting (p. 29).

Use the focus-lock function to focus on an object at the same distance as the subject (p. 53) or use manual focus (p. 65).

Pictures are	Slow shutter speeds	Use a tripod, change the cam-
taken indoors
	result in blurred images	era sensitivity to a higher set-
or in low-light
	when the camera is	ting (p. 67), or use the flash (p.
situations with-
	hand-held.	32).
out flash.

Continuous advance and bracketing drive mode does not work.

While using flash, the pictures are too dark.

The image quality is set to super fine.

The subject is beyond the flash range (p. 67).

Change the image-quality setting (p. 38, 56).

Move closer to the subject or change the camera sensitivity to a higher setting (p. 67).

118APPENDIX