GETTING UP AND RUNNING

Changing the CR-V3 battery

This digital camera uses one CR-V3 lithium battery. When replacing the batteries, the mode dial should be in the off position.N.B. Whilst this battery is available in some dig- ital camera stores we recommend that Ni-MH AA batteries be used. See next section.

2

1

Open the battery-chamber door by sliding the door toward the bottom of the camera (1) to release the safety catch; the door can then be opened (2).

 

Insert the battery. The CR-V3 battery must be inserted with the

 

battery terminals first. The flat side of the battery should face the

 

front of the camera. If the battery does not fit, check its orienta-

 

tion. Never force the battery.

 

Close the battery-chamber door (3) and slide it toward the top of

 

the body (4) to engage the safety catch.

4

After installing the battery, the set-time/date message may

3

appear on the monitor. The clock and calendar are set in the

 

custom 2 section of the setup menu (p. 20).

14GETTING UP AND RUNNING