Remote control (sold separately)

The IR Remote Control RC-3 allows remote camera operation up to 5m (16 ft.) away. The remote control unit can also be used in movie and audio recording (p. 79). The remote control may not operate with backlit subjects or under fluorescent light.

Place the camera on a tripod, and set the drive mode to self-timer / remote control (p. 38, 56). Arrange the camera and subject to compose the picture.

When setting up the camera, make sure the subject will fall within the focus frames. Focus lock cannot be used with the IR remote control. Focus area selection (p. 52) and manual focus (p. 65) can be used.

Point the emitter window of the remote control unit toward the camera and press the release button or the delay button to take the picture.

Emitter window

When the release button is pressed, the self-timer lamp on the

front of the camera (1) will blink once before the picture is taken. Delay button When the delay button is pressed, the self-timer lamp will blink

for two seconds before the picture is taken.

Release button

1

43