Konica Minolta IC-204 manual 6 7 8, Setting Up Network Printing

Setting Up Network Printing

3

5 In Administrator mode of PageScope Web Connection, select “Net- Ware Setting” from the Network tab, and then specify the following set- tings.

6

7

8

IPX Setting: Select “ON”.

Ethernet Frame Type: Select “Auto Detect”. (Select the frame type ac- cording to the network environment.)

NetWare Print Mode: Select “Nprinter/Rprinter”.

Print Server Name: Specify the print server name created in step 4.

Printer Number: Specify the printer number (0-255). When 255 is spec- ified, the setting is “Auto Detect”.

Restart this machine (turn the main power off, then on again).

–When turning the power off, then on again, be sure to turn the sub- power switch off first, then the main power switch. In addition, wait at least 10 seconds before turning the power on again; otherwise, this machine may not function properly.

Use the NetWare server console to load PSERVER.NLM.

Use the NetWare server console to display the print server screen, and then check that “bizhub 500/420/360” (created printer) is shown as “Waiting for Job” for the connected printer (0).

IC-204 3-21