Konica Minolta IC-204 3.5Raw/LPR Printing, Printer Driver Settings, Operations on This Machine

Right-click the icon of the installed printer, and then click “Properties”. On the Ports tab, click the [Add Port].

3

Setting Up Network Printing

3.5Raw/LPR Printing

This model supports the Raw printing service and LPR printing service. The Raw printing service is available with Windows 98SE/Me/2000/XP/Server 2003/XP x64/Server 2003 x64 and the LPR printing service with Windows NT 4.0/2000/XP/Server 2003/XP x64/Server 2003 x64. TCP/IP is used as the network protocol.

Note

When conducting the Raw printing with Windows 98SE/Me, an applica- tion referred to as [Peer to Peer Tool] may be necessary. For more details, contact your service representative.

Operations on This Machine

%Set the IP address for this machine.

–For the setting procedure, refer to “Setting the IP Address for This Machine” on page 3-5.

Printer Driver Settings

For Windows 2000/XP/Server 2003/XP x64/Server 2003 x64

1 For Windows 2000, click the [Start], point to “Settings”, and then click “Printers”.

For Windows XP/Server 2003/XP x64/Server 2003 x64, click the [Start], and then click “Printers and Faxes”.

2

3

4 In the “Available Printer Ports” list, select “Standard TCP/IP Port”, and then click the [New Port].

5 When the Add Standard TCP/IP Printer Port Wizard starts up, click the [Next].

6 In the “Name of printer or IP address” box, enter the IP address for this machine, and then click the [Next].

7 Select “Custom”, and then click the [Settings].

3-10 IC-204