Konica Minolta IC-204 manual 1.4Setting Up the System, To set up the printing system, Detail

1

Overview

1.4Setting Up the System

In order to use this printing system, it must first be set up.

Setup consists of connecting this machine to a computer and installing the printer driver onto the computer being used.

To set up the printing system

Setup of the printing system as described below.

1 Connect this machine to a computer. (Refer to “Compatible Interfaces” on page 1-9.)

2 Install the printer driver. (Refer to “Installing the Printer Driver” on page 2-1or “When Used With Macintosh” on page 2-31.)

3 When using a network connection, set up the network. (Refer to “Set- ting Up Network Printing” on page 3-1.)

4 Check the setup by printing a test page. (Refer to “Test Printing” on page 4-2.)

5 Install the screen fonts.

–The User Software CD-ROM contain the Latin TrueType fonts as screen fonts.

–Refer to User’s Guide in the CD-ROM separately provided for more information about Installing the screen fonts.

Installation of the printer driver may differ depending on the connection method used with this machine in addition to the operating system of the computer and the type of printer driver being used.

!

Detail

For details on connecting this machine to a computer, refer to “Compat- ible Interfaces” on page 1-9.

Note

To update an existing printer driver, delete the existing printer driver first. For details, refer to “Uninstalling the Printer Driver” on page 2-26and page 2-38.

1-12 IC-204