Konica Minolta KD-500Z user manual Adjusting the Date and Time, Setting the Self-timer Delay Time

Using the Set-up Menu (Cont’d)

Adjusting the Date and Time

-If the battery is removed for approximately 24 hours or more, the date and time settings will be lost. In this case, please reset the date and time.

1

1.Select “DATE SET”, press ￿ and the date and time settings screen appears.

See Steps 3 to 7 on pages 24 and 25 about how to make the settings.

•Once settings are completed, you will return to the set-up menu.

Setting the Self-timer Delay Time

-You can change the length of time the self-timer delays before shooting from 10 seconds (default) to 3 seconds.

-The self-timer mode for a 10-second delay (default setting) will be cancelled after a picture is taken. However, if you set the self-timer for a 3-second delay, the setting is effective even after shooting so that you can continue to take a picture using the self-timer.

1

1.Select “SELF TIMER”, press ￿ and the

settings screen appears.

Using ￿ or ￿, select “3 sec” and press either ￿ or the MENU/SET button. The setting is completed and you return to the set-up

menu.

• If you press ￿, the setting is invalidated and you return to the set-up menu.

97