5) Turning power on/off

1)Push the white power button in the upper right part of the rear panel of the RANGE7/5.

A short beep sounds, the power is switched on, and the power button is lit yellow-green.

Power button

2) Warming-up of the RANGE7/5 starts when the laser shutter is opened.

Memo

• RANGE7/5 needs to warm up for about 20 minutes after being switched ON.

• While the RANGE7/5 is warming up, a message that the RANGE7/5 is now warming up will appear on the screen of RANGE VIEWER software. This message will disappear when warming-up of the RANGE7/5 is completed.

3)Push the yellow-green-lit power button again. Two short beeps will sound, the power is switched off, and then the light of the power button will disappear.

NOTE

•Do not turn the RANGE7/5 off during measurement or data processing after a measurement.

•When turning the power OFF, do not unplug the AC power cord from the AC outlet until the power light disappears.

15