Safety Precautions

When using this handware, the following points must be strictly observed to ensure correct and safe use. After you have read this manual, keep it in a safe place where it can be referred to anytime a question arises.

WARNING    (Failure to adhere to the following points may result in death or serious injury.)

Do not use the RANGE7/5 in places where

Do not insert or disconnect the AC power cord's

flammable or combustible gases (gasoline etc.)

plug with wet hands. Doing so may cause

are present. Doing so may cause fire.

electric shock.

 

 

 

 

 

 

Always use the AC adapter supplied as a

Do not disassemble or modify the RANGE7/5 or

standard accessory with the RANGE7/5, and

AC adapter. Doing so may cause a fire or electric

connect it to an AC outlet of rated voltage and

shock.

frequency. Failure to do so may in damage the

 

 

 

 

 

 

 

 

 

 

RANGE7/5, causing a fire or electric shock.

Take special care not to allow liquid or metal

 

objects to enter the RANGE7/5. Doing so may

 

cause a fire or electric shock. Should liquid or

 

metal objects enter the RANGE7/5, turn the

 

Do not bend, twist or pull the AC power cord

power OFF immediately, disconnect the AC

excessively. Also, do not place heavy object on

adapter from the AC outlet, and contact the

the AC power cord, or damage or modify the

nearest KONICA MINOLTA-authorized service

RANGE7/5. Doing so may cause damage to the

facility.

AC power cord, resulting in fire or electric shock.

 

 

 

 

 

The RANGE7/5 should not be operated if dirt or

 

 

When disconnecting the AC adapter's plug,

dust has entered through the vent holes. Doing

always hold the plug and pull it to remove it.

so may result in a fire. For periodic inspection,

Never pull the AC power cord itself. Doing so

contact the nearest KONICA MINOLTA-

may damage the AC power cord, causing a fire

authorized service facility.

or electric shock.

 

 

 

 

 

 

 

 

 

 

 

If the RANGE7/5 will not be used for a long

Never stare into the laser emitting

time, disconnect the AC adapter from the

window.

 

 

 

 

 

 

 

 

 

AC outlet. Accumulated dirt or water on the

 

 

 

 

 

prongs of the AC adapter's plug may cause a

 

 

 

 

 

 

 

 

 

 

fire. If there is any dirt or water on the prongs of

Do not place a lens, mirror or optical

the AC adapter's plug, remove it.

element in the passage of the laser

 

 

 

 

 

 

 

 

beam. Doing so may converge the

 

The RANGE7/5 should not be operated if it is

laser beam, resulting in damage to

damaged, or smoke or odd smells are detected.

your eyes, burns or fire. To prevent

Doing so may result in a fire. In such situations,

the above accidents, make sure that a

turn the power OFF immediately, disconnect the

wall or similar which can block the

AC adapter from the AC outlet, and contact the

laser beam is located behind the

nearest KONICA MINOLTA-authorized service

object.

facility.

 

 

 

 

 

 

 

 

 

 

 

CAUTION (Failure to adhere to following points may result in injury or damage to this instrument or other property.)

Be sure to connect the AC power cord plug to an AC outlet that has a grounding terminal.

Make sure that the AC outlet is located near the RANGE7/5 and that the AC adapter's plug can be easily connected and disconnected.

Do not place the instrument on an unstable or sloping surface. Doing so may result in its dropping or overturning, causing injury. Take care not to drop the instrument when carrying it.

1