nNames of Parts and Functions

1)Carrying handle

3) Laser-emitting Window

WARNING

A laser beam is emitted

from this port.

Do not stare directly into the laser beam.

4)Laser shutter

5)Rubber sole

Laser Label Indication (page 3)

2) Light-Receiving Lens

6) Platform mounting screw hole

7) Power switch

8) AC adapter terminal

9) USB port (Type B)

1)

Carrying handle

Used to lift or carry the RANGE7/5. (Be sure to hold the RANGE7/5 body with both hands.)

2)

Light-receiving lens

Exchange the light-receiving lens for an optimum lens (Tele or Wide lens), depending on

 

 

the measuring target size and measuring distance.

3)

Laser-emitting window

A laser beam is emitted to a measuring target from this window. (Do not stare directly into

 

 

the laser beam.)

4)

Lens shutter

When the power is switched off, this shutter closes to protect the laser emitting window.

5)

Rubber sole

Four rubber soles are attached at the bottom of the RANGE7/5. To install the RANGE7/5

 

 

directly on a firm table, use these parts. Also, use the calibration chart set during field

 

 

calibration (under standard accessories); or when mounting the RANGE7/5 to the tripod

set, or measuring stand set (under optional accessories), use these parts to set the RANGE7/5 in place.

6)Platform mounting screw hole Screw holes for fastening the RANGE7/5 to the measuring stand platform or tripod platform (under optional accessories).

7)

Power switch

Turns ON/OFF the RANGE7/5 power supply.

8) AC adaptor terminal

Connect the RANGE7/5 AC adaptor plug to this terminal.

9)

USB port

When connecting the RANGE7/5 to a PC, connect the USB cable (standard accessory)

 

 

Type B plug.

7