Overview

Table 1: Using the RK-1UTB/T

Mounting Kramer products1 on the RK-1UTB

For example:

• One VP-100A unit

Two 104B units

One 104B unit

• One PS-1DVI unit

• One PT-1PS unit

• Four PS-1DVI units

The RK-1UTB/Tdoes not have to be entirely full with mounted units. You can use the optional blank panels defined in Table 2 to fill the empty spaces.

Table 2: RK-1UTB/T Blank Panels – Part Numbers

Blank Panel Description

Part Number

PNL-BLANK/1/2U-19"

60-900013

PNL-BLANK/1/4U-19"2

60-900014

PNL-BLANK/1/8U-19"

60-900015

3.1Recommendations for Best Performance

We recommend that you:

Have a Philips screwdriver available

Disconnect the mains voltage and all cables connected to each machine that is being mounted in the rack adapter before proceeding with the installation

Connect only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)

Avoid interference from neighboring electrical appliances and position your rack adapter on the rack away from moisture, excessive sunlight and dust

1 Each product is measured in inches

2 Supplied with the unit

3

Page 5
Image 5
Kramer Electronics rk-1utb user manual Recommendations for Best Performance, Using the RK-1UTB/T