KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a RC-1616 Remote Control
14
7 Connecting a RC-1616 Remote Control To connect a single RC-1616 Remote Control, do the following:
1. Connect the RC-1616 10 Base T port to the 10 Base T network, see section 5.3.
2. Detach the RC-1616 front panel by unfastening the slide action latches
(see item 1 in Figure 7) and set the dipswitches (see section 6.2.1).
3. Connect the 9V DC 1A power adapter (wall transformer) to the 9 V DC
socket and connect the transformer to the mains electricity.
You can connect up to 512 RC-1616 Remote Control units to a single
VP-128H Matrix Switcher via the 10 Base T network (see Figure 9):
Figure 9: Connecting up to 512 RC-1616 Remote Control Units to a VP-128H