Kramer Electronics VP-128H user manual - page 2

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
3 Overview 2
3.1 About the VP-128H 2
3.2 About the RC-1616 3
3.3 Achieving the Best Performance 3
4 Your VP-128H Matrix Switcher 3
4.1 The VP-128H with the Front Panel and the Rear Panel Intact 3
4.2 The VP-128H Without the Front Panel (but with the Rear Panel) 5
4.3 The VP-128H Local Control Panel (Detached Front Panel) 6
5 Connecting a VP-128H Matrix Switcher 7
5.1 Connecting the VP-128H Matrix Switcher 7
5.2 Controlling via RS-232 (for example, using a PC) 8
5.3 Connecting the VP-128H (also RC-1616) via the 10 Base T network port 9
6 Your RC-1616 Remote Control 11
6.1 The RC-1616 with the Front Panel and the Rear Panel Intact 11
6.2 The RC-1616 Front Panel Detached 12
6.2.1 Setting the Dipswitches 13
7 Connecting a RC-1616 Remote Control 14
8 Operating the VP-128H Matrix Switcher 15
8.1 Switching OUT-IN Combinations 15
8.1.1 Operating in the AT ONCE Mode 15
9 Technical Specifications 16
10 Communication Protocols 17
10.1 Kramer 2000 Protocol Supported Subset 17
10.1.1 Use of Kramer Machines 19
10.1.2 Command Details 19
10.2 Sierra Video Systems (SVS) RS-232 Compatible Protocol 28
10.2.1 Command Details I 28
10.2.2 Command Details II 29
10.3 Generic Protocol Supported Subset 39
10.3.1 Use of Generic Machines 39
10.3.2 Command Details 39