Technical Specifications
8.2 Making the Transition
You can make the transition in two ways:
Manually, for each separate transition using the
Automatically, via the TAKE button, which implements the transition at the pace set by the SPEED2 knob
8.2.1Making a Transition Manually
To make the transition, manually:
Slide the
8.2.2Making a Transition Automatically
To make the transition, automatically:
Rotate the SPEED knob2 to the right (increasing the transition speed) or to the left (decreasing the transition speed). When the knob is turned to the extreme
Pressing the TAKE button5 causes the transition to occur automatically
9 Technical Specifications
Table 4 includes the technical specifications:
Table 4: Technical Specifications6 of the
PORTS: | 4 sets of |
CONTROLS: | Front panel buttons, |
POWER SOURCE: | 12 VDC, 240mA |
DIMENSIONS: | 19” (W), 3.4” (D), 4RU (H) rack mountable7 |
WEIGHT: | 1.58kg. (3.5 lbs.) approx. |
ACCESSORIES: | Gooseneck lamp, |
| kit8, and |
1 Item 23 in Figure 1 and Table 1
2 Item 19 in Figure 1 and Table 1
3 The PREVIEW LED lights (item 21 in Figure 1 and Table 1) 4 The PREVIEW LED lights (item 22 in Figure 1 and Table 1) 5 Item 20 in Figure 1 and Table 1
6 Specifications are subject to change without notice
7 48.2cm (W), 8.6cm (D), 17.7cm (H)
8 A pair of rack ears, two spacers and ten screws
14 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |