Installing in a Desktop
5 Installing in a Desktop
This section describes how to install the VP-727Tin a desktop1. To install the VP-727Tin a desktop:
1.Cut an opening in the desktop—making the cut out on a wooden surface using a sabre saw or a keyhole saw—at the location where you want to insert the VP-727T. Figure 3 illustrates the cut out template (not to scale) defining the surface that you have to cut out to install your VP-727T.
Figure 3: Cut Out Dimensions
2.Carefully insert the VP-727Tunit into the prepared cut out opening, as illustrated in Figure 4.
Figure 4: Inserting the VP-727T into the Prepared Cut Out Opening
1 Alternatively, you can use it freestanding on a table, or mounted in a 19” rack (see section 6)
7