Kramer Electronics VP-727T user manual Inserting the Mounting Brackets through the Bracket Slits

Installing in a Desktop

3.Insert the two mounting brackets through the bracket slits on both sides of the VP-727Tunit (see Figure 5).

Figure 5: Inserting the Mounting Brackets through the Bracket Slits

4.Be sure that the upper outer rim is situated parallel to the edge of the desktop.

5.Screw the mounting butterfly screws until they reach the desktop surface (from the underneath).

6.Tighten the locking butterfly screws to lock the mounting butterfly screws. The VP-727Tunit is now secured in place, as illustrated in Figure 6.

Figure 6: Securing the VP-727T into the Prepared Cut Out Opening

8 KRAMER: SIMPLE CREATIVE TECHNOLOGY