Flash Memory Upgrade

￿￿￿￿￿￿￿￿￿￿￿

Figure 16: Atmel –Flip Window (Operation Completed)

8.Close the ª Atmel –Flipº window.

9.Turn the POWER switch on the VS-66FW OFF.

10.Disconnect the RS-232 DB9 rear panel port on the VS-66FWunit from the Null-modem adapter.

11.On the rear panel, release the FLASH button1 (to Normal), using a screwdriver.

12.Turn the POWER switch on the VS-66FWON.

Upon initialization, the VS-66FWwill work with the new firmware version.

1 Item 7 in Table 2

20

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Page 24
Image 24
Kramer Electronics user manual Turn the Power switch on the VS-66FW OFF