Kramer Electronics VS-66hdcp user manual Contents, Figures

Contents

Contents

1	Introduction	1
2	Getting Started	1
2.1	Quick Start	2
3	Overview	3
3.1	About HDCP	3
3.2	Recommendations for Best Performance	4
4	Your VS-66HDCP	4
4.1	Using the IR Transmitter	7
5	Installing the VS-66HDCP in a Rack	8
6	Connecting the VS-66HDCP 6 x 6 DVI Matrix Switcher	9
7	Operating the VS-66HDCP 6 x 6 DVI Matrix Switcher	10
7.1	Routing Inputs to Outputs	11
7.2	Disconnecting the Outputs	11
7.3	Storing and Recalling a Setup	11
7.4	Acquiring the EDID	12
7.4.1	Acquiring an EDID from a Single Connected Output	12
7.4.2	Acquiring an EDID from Several Sets of Inputs and Outputs	12
7.4.3	Acquiring an EDID from Several Connected Outputs Automatically	13
7.4.4	Acquiring the Default EDID	14
7.5	Connecting to the VS-66HDCP via RS-232	14
7.6	Operating via the ETHERNET	14
7.6.1	Connecting the ETHERNET Port directly to a PC (Crossover Cable)	14

7.6.2Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 16

7.6.3 Control Configuration via the Ethernet Port		16
8	Technical Specifications	16
9	Default Communication Parameters	17
10	Hex Table	17
11	Kramer Protocol 2000	18

Figures

Figure 1: VS-66HDCP 6 x 6 DVI Matrix Switcher Front and Rear Views	5
Figure 2: Connecting the VS-66HDCP 6 x 6 DVI Matrix Switcher	10
Figure 3: SELECTOR Buttons	11
Figure 4: Local Area Connection Properties Window	15
Figure 5: Internet Protocol (TCP/IP) Properties Window	15

i