accesstracks numbered10 or higher. The +10keyselects a track in incrementsof 10.
EXAMPLE:To access track 8, press the number8 key once. To access track 10, press the +10 key once and the 0 key once.To accesstrack 24, pressthe + 10 key twice andpress the 4 key once.
24 Display (remotecontrol only)
Usethis key to cycle the display window(1) betweenelapsedtime of the track currently playing, time remainingin the currenttrack, andtotal remainingtime of the disc or pro- gram. Press the CDkey on the remotecon- trol, then press the modekey until the desired information appearsin the display window.
25 Dim(remotecontrol only)
Usethis key to turn the display window(1) on andoff. Pressthe CDkey on the remote control, thenpressthe dimkeyuntil the dis- play windowreachesthe desired position.
TRACK PROGRAMMING
26 Prog(remotecontrol only)
Usethis key to select the tracks youwould like to hear,in the orderin which.you would like to hear them.This methodof program- mingis short termandwill be cleared when youpress the stop key (15) twice. A maxi- mumof twenty tracks maybe stored in a program sequence.
27 Clr (Clear) (remotecontrol only) Usethis keyto deletethe last entry select- ed in a programmedsequence.Track for- ward,track back, repeat, andpausefunction normally within a programmedsequence.
Note
Track forward, track back, repeat, and pause function normally within a pro- grammedsequence.
HOW TO WRITE A PROGRAM
1.Press the program key (26)
(1).
Keyin the desired track sequenceusing
=the numerickeypad(23). Thenumber tracks andtotal playing time of the pro- grammedsequencewill appear in the display window(1). Track numberswill appearin the display as they are stored within a programmedsequence.
Pressthe play key (14) to beginplayback
=of the programmedsequence.
Press the stop key (15) once to stop
=playback(but not eraseprogram).Press stop twice to erase a programmed sequence.
Note
Whenthe CDis in
HOWTO PROGRAMUSING TRACKFORWARDANDBACK
1.Press the program key (26) on the
2.Press the track forward key (17) select a track. Keyin the desiredtrack sequenceusing the numerickeypad(23). Thenumberof tracks andtotal playing time of the programmedsequencewill appearin the display window(1).Track numberswill appearin the display as they are stored within a programmed sequence.
EXAMPLE:Press track forward two times to get backto track 2.
KRELL | Page9 of 16 |