Krell Industries KCT manual Back Panel Remote Connections, Phono Stage Connector

25 Single-ended Left and Right Outputs

The KCT is equipped with one pair of single-ended outputs with RCA connectors.

Back Panel Remote Connections

26 Krell Link In and Out

The KCT is equipped with a Krell Link communications input and output data port. Krell Link allows synchronized remote power on and off of other components connected with Krell Link. See Krell Link Connections and Operation, on page 19.

27 12 VDC In and Out

The KCT is equipped with three outputs that send and one input that receives 12 VDC power on/off (12 V trigger) signals to and from other Krell components and other devices that incorporate a 12 V trigger. This allows you to turn other components on or off, or to and from stand-by, through the remote control. When the KCT is switched to the operational mode and is connected to other components through the 12 V trigger, it sends a signal that will switch other components, allowing whole systems or parts of systems to be easily coordinated.

Notes

The 12 VDC output power is limited to 30 ma.

Consult the owner’s reference manual of the components used in a custom installation to take full advantage of the remote capabilities of the KCT.

28 RC-5 In

The KCT is equipped with an RC-5 input that makes custom installation easy and secure by accepting baseband RC-5 input commands from hardwired remote controllers.

29 RS-232

The KCT is equipped with an RS-232 port that receives messages from a computer- based control system, providing integrated control of all preamplifier functions. See the KCT developer’s reference, “RS-232 Port: Sending Commands and Interpreting Data,” for more information.

Phono Stage Connector

30 Phono Power

The KCT is equipped with a phono power port, for connecting the KCT with a Krell KPE phono stage.

Power

31 IEC Power Connector

The IEC power connector is for use with the provided IEC standard 15 amp AC power cord.

Krell Current Tunnel 13